What The New Non-Locking Turret Actually Solves

What The New Non-Locking Turret Actually Solves

Both James Eagleman (Eagle Ballistics) and Jon LaCorte (TRACT Optics) highlight the same pain point: traditional locking turrets can slow competitive shooters down.

• Lift‑to‑dial systems are great for preventing accidental movement, but they cost precious seconds in PRS/NRL stages and can be awkward around barricades.
• Resetting zero normally requires an Allen key, tiny screws, and careful alignment.

TRACT’s new non‑locking, toolless reset‑to‑zero turret eliminates all of that.

You get:

• No lift‑to‑dial — just turn the turret.
• No tools required — the entire top cap threads off by hand.
• Large, easy‑to‑read numbers — a major upgrade for aging eyes or fast stages.
• Zero stop remains intact — nothing about your mechanical zero changes.

How to Install the Toolless Reset‑to‑Zero Turret – New Non-Locking

This process is simple, fast, and field‑friendly. Here’s the exact workflow Jon demonstrates:

You’ll need:

• 2.5 mm hex key (only for removing the old turret)

Steps:

1. Remove the Existing Turret – New Non-Locking

• Loosen and remove the screw holding the current locking turret.
• Lift the turret off the scope.

2. Align the New Toolless Turret – New Non-Locking

• Place the new non‑locking turret onto the post.
• Align the “0” mark perfectly with the vertical indicator line on the scope body.
  • This ensures your zero stop and your visual reference match.

3. Thread on the Top Cap – New Non-Locking

• Hold the turret firmly so it doesn’t rotate.
• Thread the top cap down until snug.
• The turret is now fully installed.

4. Reset Zero Anytime — Without Tools – New Non-Locking

James Eagleman’s demonstration shows the beauty of the design:

• Simply unscrew the top cap by hand.
• Lift the turret straight off.
• Re‑index your zero.
• Put the turret back on and tighten the cap.

No Allen screws. No fumbling. No wasted time.

Why Shooters Love This System- New Non-Locking

1. Faster Dialing Under Pressure

PRS and NRL shooters often lose seconds lifting a locking turret before dialing. This turret:

• Dials instantly.
• Eliminates the “lift first” step.
• Keeps your stage flow smooth.

2. Lower Profile = Better Around Barricades

Jon points out that the new turret sits lower, making it:

• Less likely to snag on props.
• Easier to maneuver through tight spaces.
• More comfortable for hunting rifles carried through brush.

3. Big, Bold Numbers

TRACT enlarged the turret numbers significantly.

• Faster visual confirmation.
• Easier for shooters with aging eyes.
• Better for low‑light or high‑stress situations.

4. Toolless Zero Reset

James Eagleman’s favorite feature:

• Reset zero at the range, in the field, or mid‑match.
• No need to dig for a hex key.
• Perfect for hunters traveling or shooters swapping ammo.

5. Zero Stop Stays Perfect

The turret swap does not affect the zero stop. Your mechanical baseline remains untouched.

Compatible TORIC Models – New Non-Locking

Available for both MOA and MRAD in:

34mm TORIC

• 4.5–30×56
• 4–25×50

30mm TORIC

• 4–20×50
• 2.5–15×44 (First Focal Plane)

Final Thoughts

TRACT’s toolless reset‑to‑zero turret is one of those upgrades that feels obvious once you use it. It’s faster, cleaner, and more intuitive — whether you’re a hunter resetting zero after travel or a competitive shooter shaving seconds off a stage.

Ready to upgrade your optics setup?

Phone: 631-662-7354 | Email: [email protected] | Live Chat Available

See what others are saying on Trustpilot: